No.

Type

Model

Description

1

Absolute Pressure Transmitter

FKA-4

This pressure transmitter accurately measures absolute pressure and transmits a proportional 4 to 20mA signal.

2

Pressure Transmitter

FKG-4

This pressure transmitter accurately measures gauge pressure and transmits a proportional 4 to 20mA signal.

3

Pressure Transmitter Hydroseal Diaphragm Version

FKG-4

Unique hydroseal diaphragm - Permeation of hydrogen into the detecting unit through seal diaphragm can be suppressed thanks to the unique seal diaphragm (double coating) which employs coating of gold and ceramic.

4

Remote Seal Type Pressure Transmitter

FKB-4

This pressure transmitter accurately measures gauge pressure and transmits a proportional 4 to 20mA signal. Remote Seal - Totally welded construction of the seals assures excellent reliability in high temperature and highly corrosive process conditions.

5

Remote Seal Type Pressure Transmitter (Sanitary Type)

FKB-4

As above but sanitary type

6

Small Flange Remote Seal Type Pressure Transmitter

FKW-4

This pressure transmitter accurately measures gauge pressure and transmits a proportional 4 to 20mA signal. Remote Seal - Totally welded construction of the seals assures excellent reliability in high temperature and highly corrosive process conditions

7

Differential Pressure Transmitter

FKC-4

This pressure (flow) transmitter accurately measures differential pressure, liquid level, gauge pressure or flow rate and transmits a proportional 4 to 20mA signal.

8

Differential Pressure Transmitter Hydroseal Diaphragm Version

FKC-4

Unique hydroseal diaphragm: Permeation of hydrogen into the detecting unit through seal diaphragm can be suppressed thanks to the unique seal diaphragm (double coating) which employs coating of gold and ceramic.

9

Remote Seal Type Differential Pressure Transmitter

FKD-4

This pressure transmitter accurately measures differential pressure, liquid level or gauge pressure and transmits a proportional 4 to 20mA signal. Remote Seal - Totally welded construction of the seals assures excellent reliability in high temperature and highly corrosive process conditions

10

Remote Seal Type Differential Pressure Transmitter (Sanitary Type)

FKD-4

As above but sanitary type

11

Small Flange Remote Seal Type Differential Pressure Transmitter

FKX-4

This pressure transmitter accurately measures differential pressure, liquid level or gauge pressure and transmits a proportional 4 to 20mA signal. Remote Seal - Totally welded construction of the seals assures excellent reliability in high temperature and highly corrosive process conditions

12

Level Transmitter

FKE-4

This level transmitter accurately measures liquid level and transmits a proportional 4 to 20mA signal.

13

Level Transmitter (Sanitary Type)

FKE-4

As above but sanitary type

14

Small Flange Level Transmitter

FKY-4

This level transmitter accurately measures liquid level and transmits a proportional 4 to 20mA signal.

15

Hand-Held Communicator

FXW

This instrument is a handy type communicator with built-in battery, being designed to perform facilitated communication with operater through use of "smart" type FCX series transmitter.

16

Equalizing Valve, Oval Flange

FFN3,

FFP5

This equalizing valve is designed for use with FCX-AII series differential pressure transmitters or flow rate transmitters.It is composed of two stop valves for blocking high and low pressures and one equalizing valve.

17

Equalizing Valve, Oval Flange

FFN,

FFP

This equalizing valve is designed for use with differential pressure transmitters or flow rate transmitters. It is composed of two stop valves for blocking high and low pressures and one equalizing valve.

18

Stop Valve & Condenstate Chamber

FXJ,

FXK

In measuring pressures, flow rates or levels, a process piping and a pressure piping to feed pressures from a process tank to a transmitter are required. Fuji 's stop valve and condensate chamber are designed to be used with a pressure piping system to provide proper maintenance of transmitters and better measurement accuracy. Both the stop valve and condensate chamber are available in different operating pressure ratings to permit selection according to applications.

19

Compact Pressure Sensor

FCK

The compact pressure sensor measures the pressure or absolute pressure of liquids, gases or steam, and outputs a current signal. A compact and simple structure procures high reliability and long-term stability. The instrument can be mounted on any of general industrial facilities, and is best suited for automation, labor-saving, efficient operation, etc. of equipment.

No.

Type

Model

Description

1

Infrared Gas Analyzer

ZRH

This NDIR gas analyzer is used for measuring CO 2 , CO, SO 2 and CH 4 and features a high accuracy, multiple functions and easy operation through use of a microprocessor. It is housed in an easy-to-use horizontal case (can be flush mounted on panel, mounted on 19 inch rack, placed on table top), or vertical case (can be flush mounted on panel, mounted on wall) .

2

Zirconia Oxygen Analyzer Type test certificate approved

ZRY, ZFK

This oxygen analyzer is used to continuously measure oxygen concentration in combustion exhaust gas of industrial boilers or furnaces, and is ideally suited for combustion monitoring and control. The detector (ZFK) is directly inserted into the objects measured, eliminating the need for a sampling device and provides quick response. The converter (ZRY) features 3 measuring ranges, one touch calibration and NEMA4 housing. Comparing to the current converter (ZRM) , this ZRY is recognized as economical type with simple functions.

3

Zirconia Oxygen Analyzer Type test certificate approved

ZRM, ZFK

This oxygen analyzer is used to continuously measure oxygen concentration in combustible exhaust gas of industrial boilers or furnaces, and is ideally suited for combustion monitoring and control. The detector (ZFK) is directly inserted into the objects measured, eliminating the need for a sampling device and provides quick response. The converter (ZRM) features automatic calibration and blowdown functions. The adoption of liquid crystal display facilitates operation and setting in interactive mode. Besides the general-use type detector, corrosion resisting type and high temperature type are available for selection according to applications.

4

Zirconia Oxygen Analyzer

ZSB

This oxygen analyzer is used to continuously measure oxygen concentration in combustion exhaust gas of industrial boilers or furnaces, and is ideally suited for combustion moni-toring and control. The detector (ZSB) used with the analyzer is directly inserted into the objects measured, eliminating the need for a sampling device and provides quick response. In addition, this analyzer is standard-provided with functions for automatic calibration and automatic blow-down, so stable measurement can be performed free of maintenance. Operations and settings can be easily carried out in an interactive way using a liquid crystal display.

5

Infrared Gas Analyzer

ZRF

This NDIR gas analyzer features a high accuracy, multiple functions and easy operation through use of a microprocessor. It also utilizes a mass flow detector noted for its high sensitivity and reliability. Being housed in a 19 inch rack case suitable for mounting on a panel or a table top, this analyzer is applicable not only for measurement of environmental pollution but for use in various processes and/or experimental laboratories.

6

Paramagnetic Oxygen Analyzer

ZAJ

This product is an analyzer which measures oxygen concentration in a sample gas by converting it into pressure, utilizing the magnetic property of oxygen. When compared with the oxygen analyzers of other measuring systems, this oxygen analyzer features a faster response, and smaller influence by coexisting gas and combustible gas, etc. Further, this analyzer is easy to use because of abundant functions such as discretionary range setting and interactive operation. It is usable in diverse field including control of various heat treating furnaces, combustion furnaces and other various fields.

7

Paramagnetic Oxygen Analyzer

ZKG

This product is a dumbbell type paramagnetic oxygen analyzer. Because this analyzer is based on that the magnetic susceptibility of oxygen gas is larger than coexisting gases, stable measurement is ensured unaffected by coexisting gases. The detector does not have a heating part such as heater. Therefore, this analyzer is suited for measuring the oxygen concentration in flammable gas. Further, running cost can be saved since reference gas is not required.

8

Automobile Exhaust Gas Analyzer

ZKE

Fuji Electric has been marketing this CO/HC automobile exhaust gas analyzer for 25 years. A new user friendly analyzer has been developed, and it can measure 6 parameters (CO, HC, CO 2 , O 2 , A/F and��).

9

Infrared Gas Analyzer For Stack Gas <5-Component Analyzer>

ZSU-3

This analyzer consists of an infrared gas analyzer, an O 2 sensor and a gas sampling device. It is used for simultaneous and continuous measurement of the NO X , SO 2 , CO, CO 2 and O 2 components in the flue gas of various boilers, garbage incinerators,etc.

10

Infrared Gas Analyzer For Stack Gas

ZSP

This instrument consists of an (or two) infrared gas analyzer(s), a zirconia O 2 sensor and a sampling device. It is used for measuring the NOx, SO 2 , CO and O 2 components in the flue gas of various boilers, garbage incinerators, furnaces, etc. It is extensively applicable as a gas analyzer for environmental pollution control and combustioncontrol.

11

CO/O 2 Gas Analyzer for Stack Gas

ZSQ-3

This instrument is equipped with a non-dispersive infrared CO sensor and a zirconia O 2 sensor. It is used for measuring CO and O 2 in the gas emitted from a garbage incinerator to meet Japanese regulation on emission control of dioxins (tetrachlorodibenzoparadioxins). CO instantaneous value, O 2 instantaneous value, CO instantaneous value after O 2 correction and CO average values after O 2 correction (1-hour and time-variable averagings) can be output, and a peak count/alarm function is incorporated.

12

CO/O 2 Gas Analyzer for Stack Gas

ZSW

This instrument is equipped with a non-dispersive infrared CO sensor and a galvanic oxygen sensor and used for measuring CO and O 2 in the gas emitted from garbage incinerators. CO instantaneous value, O 2 instantaneous value and CO average value after O 2 correction (1-hour and time-variable averaging) can be output.

13

Ndir Type Infrared Gas Analyzer <5-Component Analyzer>

ZKJ

This gas analyzer (ZKJ) is capable of measuring the concentrations of NO, SO 2 , CO 2 , CO, CH 4 and O 2 components in sample gas. NO, SO 2 , CO 2 , CO and CH 4 are measured by non-dispersion infrared method (NDIR), while O 2 is measured by built-in type paramagnetic method sensor or external-mount type zirconia method sensor. A maximum of 5 components including O 2 (max. 4 components except for O 2 measurement) are simultaneously measurable. The mass flow type twin detector of high sensitivity and reliability adopted in the infrared ray method detection block makes the measurement hardly affected by interfering components. In addition, a microprocessor is built in and a large-size liquid crystal display is equipped for easier operation, higher accuracy and more functions. Optimum as an analyzer unit of measurement system for combustion exhaust gas from refuse incinerator and boiler, or gas from different industrial furnaces.

14

Infrared Gas Analyzer

ZRJ

This gas analyzer (ZRJ) is capable of measuring the concentrations of CO 2 , CO, CH 4 ,SO 2 , NO and O 2 components in sample gas. CO 2 , CO, CH 4 , NO, and SO 2 are measured by non-dispersion infrared method (NDIR), while O 2 is measured by paramagnetic, fuel cell, or zirconia method. Up to 4 components including O 2 (up to 3 components in measurement of gases other than O 2 ) can be measured simultaneously. A high-sensitivity mass flow sensor is adopted in the detection block for the infrared method. Due to use of single beam system for measurement, maintenance is easy and an excellent stability is ensured for a long period of time. In addition, a microprocessor is built in and a large-size liquid crystal display is equipped for easier operation, higher accuracy and more functions. This analyzer is thus optimum for combustion control of various industrial furnaces, botanical study and global atmospheric research.

15

Infrared Gas Analyzer

ZRC6

This infrared gas analyzer measures the concentration of gas by utilizing the characteristic of gas (molecule consisting of different-kind atoms) that it absorbs the infrared ray of a specific wavelength. Stable and accurate measurement is ensured due to use of a mass flow sensor with a high sensitivity, interferencecompensating detector, etc. This analyzer is to be built in sampling equipment and optimally usable for measuring the concentrations of various gases.

16

Infrared CO 2 Controller

ZFP

This is a non-dispersion type infrared CO 2 gas analyzer. It accurately measures the concentration of CO 2 gas in the air, indicates the result and simultaneously outputs an analog signal. Since upper and lower limit alarm functions are standard it can also be used as a controller. This instrument is suitable for use as a CO 2 meter in green houses, building ventilation systems, CA (Controlled Atmosphere) storage facilities, and so on.

17

Portable Gas Analyzer

ZSV

This gas analyzer (ZSV) is a portable gas analyzer consisting of an analyzing block (infrared sensor and oxygen sensor) and a sampling block. For gas extractor, either simplified measurement (non-fixed type) or continuous measurement (fixed type) probe is selectable at option. Because a single beam type high-sensitivity mass flow sensor is adopted for the infrared sensor, long-term stability and maintainability are excellent. This analyzer is capable of simultaneously measuring max. 5 components among NOx, SO 2 , CO 2 , CO, CH 4 and O 2 in sample gas, and is used for flue gas from stationary emission sources such as various boilers, garbage incinerators and heat treatment furnaces, and for plant cultivation and research-purpose chemical analysis.

18

Portable Gas Analyzer

ZFY

This unit is a simple and stable analyzer using a single-beam infrared-ray system. It is designed for measuring carbon dioxide gas (CO 2 ), carbon monoxide (CO) or methane (CH 4 ), and is used to measure atmospheric gases in agricultural vinyl greenhouse, carbon dioxide gas in rooms or carbon dioxide gas, carbon monoxide, ethane, etc., in thermal processing furnaces.

19

Thermal Conductivity Gas Analyzer

ZAF

Thermal conductivity gas analyzer is a gas analyzer which quantitatively measures gas concentration by utilizing a causal relationship that the temperature of a heated platinum wire changes with gas concentration. This analyzer measures the concentration of gas such as H 2 , He or Ar continuously and outputs a current of 4 to 20 mA DC.

20

Infrared Gas Analyzer

ZRG

This NDIR gas analyzer features high accuracy, multiple functions and easy operation through use of a microprocessor. It also utilizes a mass flow detector noted for its high sensitivity and reliability. This analyzer is used not only for measuring environmental pollution but is also used for various processes and/or experiments. This product, combined with sampling system (ZSP), has passed the type-approval test based on Weight and MeasureAct.

21

Sampling Device Series For Gas Analyzer

ZB*

• Gas Extractor (model: ZBA)
• Gas Filter, Gas Washing Separator and Washing Nozzle SO 3 Mist Catcher (model: ZBB ).
• Peltier Gas Cooler (model: ZBC), Perma Pure Dryer (model: ZBJ)
• Flow Meter and Regulator (model: ZBD)
• Ball Valves and Selector Valves (model: ZBF)
• Gas Aspirator (model: ZBG)
• Drainings & other (model: ZBH)
• Gas Converter (model: ZDL)
• Standard Gas (model: ZBM)

22

Portable CP Analyzer

ZFX

Fuji Portable CP Analyzer is used to measure CP (Carbon Potential) value of the inside furnace such as a Carbonized furnace or a Generation furnace. CP value is calculated by the following 3 parameters, the measuring value of CO 2 , supposed setting value or measuring input with K type TC temperature of the inside furnace and the supposed setting value CO concentration. A high level accuracy infrared system is adopted to measure CO 2 concentration.

No.

Type

Model

Description

1

Micro Controller X

PXV,

PXW,

PXZ

This series has auto-tuning and fuzzy control in all models, and ramp soak function, heater burnout alarm, and communication function as options. Available in standard and water-proof formats, it conforms to various international standards such as UL, CE and ISO 9001.

2

Micro Controller X PXR

PXR

3,4,5,9

With a front waterproof structure (conforming with NEMA-4X:IP66). The front panel is washable with water. It has d iverse control and tuning functions, and is c apable of covering various controls within a wide range from simple ON/OFF control to fuzzy PID control. It has r e-transmission output in 4 to 20 mA DC , and the PV (process value), SV (set value) and MV (manipulated output value) can be transferred to other measuring instrument. Equipped with 8-step ramp/soak function, it a llows usage as a simple programmable controller with a set value program. It is capable of RS-485 communication, and is also s electable between MODBUS protocol and Z-ASCII ( Fuji ’s original). SV (set value) is selectable and various events are executable by external switches, etc. With a self-heating process, it has a h eater burnout alarm. Equipment damage can be prevented with v arious alarm function such as d elay action, and excitation/non-excitation selection.

3

Micro Controller X PXG

PXG4

PXG4 is a compact size temperature controller of front panel size 48 × 48 mm. To cope with any of versatile uses as a temperature controller, it has many input/output points and sophisticated control functions.

4

Micro Controller X PXG

PXG5

PXG5 has a front panel size of 48 × 96 mm.

5

Micro Controller X PXG

PXG9

PXG5 has a front panel size of 96 × 96 mm.

6

Fuzzy Controller X

PYX4

The PYX is a state-the-art temperature controller offering enhanced control through the use of fuzzy logic, and thus it virtually eliminates system overshoot and effectively supresses fluctuation of the process variable due to external disturbances. This controller features universal input circuitry and can accept signals from all thermocouple types, RTD's, and current/voltage sources. Also, the PYX-4 gives you the flexibility of choosing available features such as RS-485 communications, analog retransmission, dual output, heater break alarm, and loop break alarm, etc. Its front panel dimension is 48 x 48 mm.

7

Fuzzy Controller X

PYX5,9

Sporting the same features as the PYX4, i ts front panel dimension is 48 x 96 mm, and 96 x 96 mm.

8

Micro Controller H

PYH

Micro Controller “H”, Fuji 's upgraded Z-series controller incorporating a micro processor, provides the digital communication and high speed operation cycle (100 ms). It is ideally suited for small scale plant or small scale factory automation.

9

Digital Thermostat

PAS3

This product is an on/off temperature alarm unit which inputs signals from a thermocouple or thermistor sensor and transmits a relay contact output when an input signal reaches the preset alarm level. This thermostat is most suited for overheat detection in machines, equipments, etc.

10

Digital Controller

PXH

PXH9 is a 96x96 mm, high-performance digital controller that assures high-speed and high-accuracy control. With its abundant and flexible input/output points and powerful math function, it can be used for wide range of applications including not only temperature control but also process control of pressure, flow rate, etc.

No.

Type

Model

Description

1

Compact Controller M (CC-M)

PDA3

This controller (programmable continuous output type) is a multi-loop process controller. It accepts 1 to 5 V DC and signals from thermocouples and resistance bulb as input, and is provided with abundant control and computation functions to allow configuring a flexible system with a high cost performance.

2

Compact Controller M (Fixed Function / Continuous Output Type)

PDA1

his controller (fixed function/continuous output type) is a single-loop process controller. Receiving 1 to 5V DC signals as well as those from thermocouples and resistance bulbs as input signals, it performs advanced controls such as PID control, square root extraction, non-linear control, and feed forward control.

3

Compact Controller M (Fixed Function / Step Output Type)

PDC1

This controller (fixed function/step output type) is a single-loop process controller. Receiving 1 to 5V DC signals as well as those from thermocouples and resistance bulbs as input signals, it performs advanced controls such as PID control, square root extraction,and non-linear control.

4

Compact Controller M (Step Output Type)

PDC2

This controller (programmable step output type) is a single-loop process controller. It accepts 1 to 5 V DC and signals from thermocouples and resistance bulb as input, and is provided with abundant control and computation functions.

5

Manual Loader

PDB3

The FC series Manual Loader carries out remote control in combination with a controller. This product is a manual loader to be used in a process and it excels in the effect of monitoring due to adoption of a color LCD. Besides standard signals of 1 to 5 V DC , input signals from thermocouples and resistance bulbs can be handled at option.

6

Setter

PDF3

The FC series Setter is used for remote setting of a controller, setting of variable constants of diverse computing units, etc. This product is a setter to be used in a process and it excels in the effect of monitoring due to adoption of a color LCD. Besides standard signals of 1 to 5 V DC , input signals from thermocouples and resistance bulbs can be handled at option.

7

Ratio Setter

PDG3

The FC series Ratio Setter carries out ratio setting and computation for ratio control and sends a signal to a controller as its set value. This product is a ratio setter to be used in a process and it excels in the effect of monitoring due to adoption of a color LCD. Besides standard signals of 1 to 5 V DC , input signals from thermocouples and resistance bulbs can be handled at option.

8

Electronic Indicator

PDJ3

The FC series Indicator is a indicator to be used in a process and it excels in the effect of monitoring due to adoption of a color LCD. Use of two bargraph display has enabled arrangement of many monitoring points influenced by one another. Besides standard signals of 1 to 5 V DC , input signals from thermocouples and resistance bulbs can be handled at option.

9

Replace Case

PDZE

This replacing case is used in a situation where compact controller E series and F series are replaced with compact controller M series. This product is convenient when wiring from the duct is difficult. It results in substantial labor savings.

No.

Type

Model

Description

1

Paperless Recorder

PHL, PHR

This is a paperless recorder that displays measured data on the LCD in real time and stores data in CompactFlash. The type of input such as thermocouple, resistance bulb, D.C. voltage (current), etc. can be arbitrarily set to 18 channels at the maximum. The data stored in CompactFlash can be regenerated on the screen, and the use of supplied support software allows the data to be regenerated on a PC screen. The data recorded in ASCII format can be directly read in a spreadsheet such as Excel, which facilitates the processing on a PC. (The data recorded in binary format cannot be read in.)

2

FCR Microjet Recorder (180mm)

PHA

This recorder can record a maximum of 12 channels of DC voltage, mA, thermocouples and resistance bulbs. The adoption of an ink jet system makes it possible to record measured data in analog trace mode or to print in digital mode at a high speed. This 180mm-wide recorder performs recording clearly in 6 different colors.

3

FCR Microjet Recorder (24-Channel)

PHB

Similar to PHA, but it can record a maximum of 24 channels.

4

FCR Microjet Recorder (100mm)

PHC

Similar to PHA, but it can record a maximum of 6 channels.

5

FCR Microjet Recorder-E (100mm)

PHE

This recorder can record up to 6 channels of thermocouples, resistance bulbs and DC voltage/current signals. The adoption of ink jet system makes it possible to record measured data in analog trace and digital color printing (6 colors, max) on a 100mm wide chart paper.