Flow banner
PKP Process Instrumentation logo alt

PKP Flow Indicators



For flow monitoring of low and medium viscous liquids. Bidirectional flow with turbine, visibility 360°

More details

To monitor liquid flows. Easy mounting between two DIN or ANSI flanges. For pipe sizes from 3/8\\\" / DN10 to 12\\\" / DN300. Insensitive to dirt build-up

More details

The build-in wipers allow the cleaning of the inside of the sight glass with just a turn of the hand, a time consuming disassembly is not necessary

More details

Full Bore Version, Optionally With Flap Or Rotor Materials: Cast Iron, Cast Steel Or Stainless Steel

More details

To monitor the flow of low and medium viscous liquids. The integrated flap and a graduated scale located behind the sight glass allow a course estimate of the flow rate.

More details

To monitor the flow of liquids with low or medium viscosities. Robust industrial version. Good visibility of rotor through glass dome

More details

To monitor the flow of low and medium viscous liquids ad gases. Suitable for aggressive media

More details

Full Bore Version, Optionally With Flap Or Rotor.

More details

Miniature flowmeter and switch with glass measuring tube, economical version for measurement and monitoring of low viscous liquids or gases

More details

Variable area flowmeter and switch with glass measuring tube for measurement and monitoring of low viscous liquid or gaseous media

More details

The flowmeters model DS15 works according to the proven variable area principle. The float is moved upward by the flowing medium and its upper edge indicates the flow rate by means of a scale affixed onto the measuring tube. By using a float with an integrated magnet optional alarm contacts or an analog output transducer may be operated. All flowmeters have a male thread on the measuring tube and are additionally equipped with PVC glue-in connectors. Also possible are connectors with female thread (bsp) made of PVC, PP, PVDF, brass or st. steel.

More details

Model series DS20 flow meters work according to the suspended-float principle of measurement. The device has a direction of flow. The movement of the float is transmitted magnetically to a dial indicator mounted outside the the indicator can also be fitted with contacts or an analog output.

More details

The flow meters model DS25 work according to the proven variable area principle.The float is guided in a conical measuring tube and is nearlyindependent of the viscosity of the medium. The flowingmedium moves the float in the flow direction. An externallymounted pointer indicator is magnetically coupled to thefloat and thus, following the float position, indicates the flow rate on a scale.This indicator assembly is equipped with a scale calibrated to the operating conditions in the system and additionallymay contain alarm contacts or an ananlog output.

More details

The model DS51 flow monitors are rugged, heavy duty devices that are to a great extend immune to faults. A piston with integrated permanent magnet is forced by the flow against a stainless steel spring in the direction of flow and actuates a reed switch attached to the enclosure. The reed contact closes upon flow and opens when the flow drops below a preset value.

More details
Back To Top

Send Enquiry