• Universal, input loop powered indicator.
• Very large 26mm (1") digits.
• Displays the actual value, measuring unit and loop current.
• Selectable on-screen engineering units: %, PPM, meter, m, cm, mm, ft, sqft, ML, L, NL, M³, nM³, GAL, USGAL, IGAL, bbl, CUFT, mg, g, kg, ton, lb, psi, psig, mbar, bar, barg, °C, °F, K, P, RPM, K, KPA, pH, mV or no unit (others on request).
• Selectable on-screen time units for flow rate: /sec, /min, /hour, /day or no unit.
• Number of digits for actual value: 5½.
• Piegraph indication: ten segments.
• Auto backup of all settings.
• Ambient temperature: -40°C to +80°C (-40°F to 176°F).
• LED backlight option.
• Easy configuration with clear alphanumerical display.
• Aluminum DIN front panel of 144 x 72mm (5.67” x 2.83”) according DIN 43700 / IEC 61554.
• Various accessories are available for this product.

• Universal applications where a multi-purpose display is required without monitoring function, linearization or signal re-transmitting.
• The D090 takes operating energy from an input current (2-wire 4 - 20mA) and reduces installation cost.
• The D-Series is a DIN-sized display and the better alternative for your existing, not waterproof, front panel mount indicators in extreme weather outdoor applications or e.g. in food industries where working environments are often cleaned with powerful water jets.

• Unique, robust IP66, IP67 (NEMA Type4X) panel mount front enclosure made of die cast aluminum, allowing even big jets of water and total immersion.
• Familiar easy operation with the Fluidwell "Know one, know them all" configuration structure, saving time, cost and aggravation.

• Universal loop powered indicator.
• Intrinsically safe according ATEX, IECEx and CSA C-US.
• Input signal: 4 - 20mA with ultra low voltage drop < 1V DC, allowing easy installation in almost any 2-wire, 4–20mA loop.
• Displays the actual value, measuring unit and loop current.
• Very large 26mm (1") high digits.
• Selectable on-screen engineering units: L - NL - mL - M³- AM³ - NM³ - mg - g - Kg - TON- OZ- GAL - USGAL - IGAL - lb - bbL- cf - CUFt - scf - p - rev - °C - °F - K - % - M - mm - CM - mtr - inch - Ft - SQFt – Yd - PSI - psig - mbar - MbARG - bar - barg – bara – PA - PAG - KPA – KPAG - MPA - INHG – mmHg - mmH2O - MH2O – INH2O- Ph – mV – mA - A - uS – PPM – RPM or no unit.
• Selectable on-screen time units for flow rate: /SEC – /S – /MIN – /M – /HR – /H – /DAY – /D or no unit.
• Number of digits for actual value: 5½.
• Piegraph indication: ten segments.
• Auto backup of all settings.
• Ambient temperature: -30°C to +70°C (-22°F to +158°F).
• LED backlight with separated circuit from the input circuit.
• Easy configuration with clear alphanumerical display.
• Aluminum DIN front panel of 144 x 72mm (5.67” x 2.83”) according DIN 43700 / IEC 61554.
• Various accessories are available for this product.

• Universal applications where a loop powered, multi-purpose display is required without monitoring function, linearization or signal re-transmitting.
• The D490 takes operating energy from an input current (2-wire 4 - 20mA) and has a separated backlight circuit.
• The D-Series is a DIN-sized display and the better alternative for your existing, not waterproof, front panel mount indicators in extreme weather outdoor applications or e.g. in food industries where working environments are often cleaned with powerful water jets.

• Unique, robust IP66, IP67 (NEMA Type4X) panel mount front enclosure made of die cast aluminum, allowing even big jets of water and total immersion.
• Familiar easy operation with the Fluidwell "Know one, know them all" configuration structure, saving time, cost and aggravation.

Features

• Displays engine speed and running hours simultaneously and additional accumulated running hours, alarm values and alarm messages.
• On-screen engineering units: HOURS and RPM.
• Displays clear alarm messages.
• Red flashing LED backlight in case of an alarm; intensity adjustable.
• Large 17mm (0.67") digits for engine speed or running hours.
• Various alarm values can be entered: low / high engine speed alarm and total running hours alarm.
• Auto backup of all settings.
• Ambient temperature: -40°C to +80°C (-40°F to 176°F).
• Easy configuration with clear alphanumerical display.
• Aluminum DIN front panel of 144 x 72mm (5.67” x 2.83”) according DIN 43700 / IEC 61554.
• Various accessories are available for this product.

Applications:

• Tachometer applications that require monitoring and recording both engine speed and running hours are ideal for the D-Series.
• This DIN-sized display offers a superior alternative to traditional, non-waterproof front panel indicators, especially in harsh outdoor environments or industries such as food processing, where cleaning with high-pressure water jets is common.

• This durable, IP66 and IP67 (NEMA Type 4X) panel-mounted front enclosure is constructed from die-cast aluminum, providing protection against powerful water jets and complete immersion.
• It features the familiar and user-friendly Fluidwell "Know one, know them all" configuration system, simplifying operation, reducing setup time, costs, and potential issues.